A. Center (total booth opening)........ 5 1/2' (66") to 6' (72")

B. Inside back to table edge clearance.... min. 16" to max 18"

C. Recommended table sizes:

• 5 1/2' (66") Center ..........24" x 42"
• 6' (72") Center ................30" x 42"
• 1/2 Circle ........................24"or 30" x 42" with all radius corners
• 3/4 Circle ........................42" x 42" with all radius corners

D. Table top height ...................30"

E. Seat height ..........................18"

Required door opening for 36"H booth: 37" Opening

When measuring for floor plan/booth layouts, consider door and window facings, baseboards, floor moldings, special wall and floor heating arrangements, posts, angles and special radius corners.

Be sure to check floor and wall measurements at several locations. 

A steel tape should be used in measurement of floor dimensions.

Indicate if measurements are exact or allowance has been made for fitting.

When special angles or radius corners are ordered, Sims requires a template made from cardboard.