Definitions of Terms

Angles and Curves-

Angles other than 90 degrees(standard) are considered custom. Curves other than those shown in photographs or drawings are considered custom.

Base, Bottom-

The lower part of the base that rests on the floor.

Base, Top-

Section of the base between the base bottom and the seat.

Biscuit or Diamond Sewn-

Booth back with machine sewn square or diamond pattern.

Biscuit or Diamond Hand Tufted-

Hand folded biscuit or diamond pattern.

Cap strip-

Strip of trim used to finish the top of the back; may be used to join two booths.

Center-

Dimensions of the booth opening.

Channels-

Vertical folds (one or more) on booth back.

Class-

Category of freight that determines the basic rate.

COM-

Customer's Own Material

Crumb Strip-

A two-inch strip of trim that can be added to models that do not have a crumb trough.

Crumb Trough-

Standard wipe out tray between the back and seat.

Deuce-

Seats one person.

Divider-

Additional piece of trim that extends back height to add privacy.

Double Single Trim-

Strip (shipped separately) to join a single backing up to a half or three-quarter circle.

Eased Edge or Corner-

Radius enough to remove sharp edge or corner.

Finished or Unfinished End-

Specify left or right as you are sitting in the booth (not facing it).

FOB-

Free On Board: merchandise accepted by the carrier.

Grade-

5 Grades: booth cost determined by the cost of upholstery to the manufacturer.

Headroll-

Six-inch horizontal accent channel horizon across top of booth; may extend down sides; may be smooth or shirred.

ISB-

Inside Back

KD-

Knocked Down. Product is shipped unassembled.

Opening-

Dimension that includes a table and seating on either side.

OA-

Overall Dimension

OSB-

Outside Back.

Post Panel or End Cap-

Trim to finish the end of a booth; may be used to join 2 booths.

Return-

Outside back of the short end of a circle.

Rise-

Booth back that is higher in the center, sloping down to standard 36" height at both ends.

SE-

Self Edge on table top.

SU-

Set Up. Product is shipped assembled.

Wall Panel-

A laminated or upholstered partition, the height of the booth and the length of the center.

Welt-

A covered cord sewn into a seam for reinforcement or trim.

WW-

Wall to Wall dimension.

Sims Superior Seating, Inc. P.O. Box 284 / 6951 South Highway 42
Locust Grove, Georgia 30248 Metro Atlanta 770.957.9667 | Toll Free 800.729.9178
Metro Atlanta Fax 770.954.1935 | Toll Free Fax 866.273.1423
E-Mail customerservice@simsseating.com
© Sims Superior Seating, Inc.